PSP Error Codes

Dieses Thema im Forum "PSP Anleitungen" wurde erstellt von Noli, 6. Januar 2010.

  1. Noli

    Noli Administrator Mitarbeiter

    Beiträge:
    8.652
    Zustimmungen:
    746
    Hier eine Liste der bekannten Error Codes für die PSP

    DADADADA - Running a FW Update in DAX custom FW
    80010087 - Error reading UMD or UMD not present
    80110305 - Load failed.The Memory Stick could not be acessed
    FFFFFFFF - PSP update failed
    UKN9000001 - update cant start, data corrupt
    80020148 - Unsupported PRX type | This error also appears when running an iso with a fake mem. stick
    98765432 - Selected a language who's font has been removed. DAX FW ONLY ERROR!
    8001006F - Remote Play connection error. Most likely when no PS3 is sending a signal over your network.
    800200D1 - Ran homebrew without Homebrew enabled firmware.
    8002014C - Ran kxploited homebrew without Homebrew enabled firmware.
    80020321 - Ran a game that doesn't support NO-UMD* (DAX FW ONLY!)
    80110404 - Network error, try restore default settings to fix
    CA000005 - keys.bin not found when trying to run a PS1 game.
    80000004 - General PSP code error.
    80110307 - Load Failed There is no Data available
    80010002 - Putting the POPS EBOOT in the wrong folder
    80000001 - Got it when trying to run PSP filer version 3.6 on 3.40* firmware
    00000001 - WiFi error. Occurs when no access points are detected in official 3.7X and custom 3.7X firmware.
    80410A0B - Loose WiFi card (did you drop your PSP?)
    80110305 - Load failed.The Memory Stick could not be acessed
    ffffffff - PSP update failed
    80020321 - No umd in drive when no umd is disabled
    UKN9000001 - update cant start, data corrupt
    98765432 - Selected a language who's font has been removed.
    8001006F - Remote Play connection error. No PS3 signal over your network.
    80020148 - Unsupported PRX type
    800200D1 - Ran homebrew without Homebrew enabled firmware.
    8002014C - Ran kxploited homebrew without Homebrew enabled firmware.
    CA000005 - keys.bin not found when trying to run a PS1 game.

    If you know of any other codes please post them here.

    *Expanded Section (many more all in order) - credits to Cyberdine
    80020148 - (unsupported PRX type)?
    800201A8 - (WAIT timeout)?
    80020130 - File Read Error (ex. length is 0)
    80020001 - Generic Kernel Error - default (ex. executable is invalid) 800200D9
    - Failure to allocate memory block (ex. missing PSP)
    80410D07 - Connection error has occurred. (Ie cant find access pt)
    80020001 - error
    80020002 - not implemented
    80020032 - illegal exception code
    80020033 - exception handler not use
    80020034 - exception handler already used
    80020035 - system call table not use
    80020036 - system call table already used
    80020037 - illegal system call table
    80020038 - illegal Primary Syscall number
    80020039 - Primary Syscall number already use
    80020064 - call from interrupt handler/thread
    80020065 - illegal INTRCODE
    80020066 - CPU already interrupt disable
    80020067 - Handler already exist
    80020068 - Handler not found
    80020069 - illegal interrupt level
    8002006a - illegal address
    8002006b - illegal Intr Handler Option Param size
    8002006c - illegal stack address
    8002006d - already stack address set
    80020096 - not found free Hard Timer
    80020097 - illegal timer ID
    80020098 - illegal source
    80020099 - illegal prescale
    8002009a - Hard Timer in use
    8002009b - Hard Timer not setup
    8002009c - Hard Timer not in use
    800200a0 - unit number already used
    800200a1 - unit number not used
    800200a2 - rom directory not found
    800200c8 - id type already exist
    800200c9 - id type not exist
    800200ca - {not available}
    800200cb - unknown UID
    800200cc - unmatch UID type
    800200cd - id not exist
    800200ce - not found UID function
    800200cf - UID already holder
    x800200d0 - UID not holder
    800200d1 - illegal permission
    800200d2 - illegal argument
    800200d3 - illegal address
    800200d4 - the memory area is out of range
    800200d5 - the memory area is overlap
    800200d6 - illegal partition id
    800200d7 - partition in use
    800200d8 - illegal memory block allocation type
    800200d9 - failed to allocate memory block
    800200da - inhibited to resize this memory block
    800200db - failed to resize this memory block
    800200dc - failed to allocate heap block
    800200dd - failed to allocate heap
    800200de - illegal chunk id
    800200df - cannot find chunk name
    800200e0 - there is no free chunk
    8002012c - module link error
    8002012d - illegal object format (not PRX/PFX)
    8002012e - not found Module
    8002012f - not found Module file
    80020130 - Module file read error
    80020131 - memory in use
    80020132 - partition mismatch
    80020133 - module already started
    80020134 - module not started yet
    80020135 - module already stopped
    80020136 - module cannot stop
    80020137 - module not stopped yet
    80020138 - module cannot remove
    80020139 - exclusive load
    8002013a - Library is not linked yet
    8002013b - Library already exists
    8002013c - Library not found
    8002013d - illegal Library header
    8002013e - Library isused now
    8002013f - module already stopping
    80020140 - illegal off set value
    80020141 - illegal position code
    80020142 - illegal access code
    80020143 - module manager busy
    80020144 - illegal flag
    80020145 - cannot get module list
    80020146 - prohibit Load Module device
    80020147 - prohibit Load Exec device
    80020148 - unsupported PRX type
    80020149 - illegal permission call
    8002014a - cannot get module information
    8002014b - illegal Load Exec buffer
    8002014c - illegal Load Exec file name
    8002014d - There is no exit callback
    80020190 - no memory
    80020191 - illegal attr parameter
    80020192 - illegal thread entry address
    80020193 - illegal priority value
    80020194 - illegal stack size
    80020195 - illegal mode
    80020196 - illegal mask
    80020197 - illegal thread ID
    80020198 - not found thread
    80020199 - not found semaphore
    8002019a - not found event flag
    8002019b - not found message box
    8002019c - not found Vpool
    8002019d - not found Fpool
    8002019e - not found message pipe
    8002019f - not found alarm
    800201a0 - not found thread event handler
    800201a1 - not found callback
    800201a2 - thread already DORMANT
    800201a3 - thread already SUSPEND
    800201a4 - thread is not DORMANT
    800201a5 - thread is not SUSPEND
    800201a6 - thread is not WAIT
    800201a7 - now dispatch disabled
    800201a8 - WAIT timeout
    800201a9 - WAIT canceled
    800201aa - WAIT status released
    N800201ab - WAIT status released with callback
    800201ac - thread is terminated
    800201ad - semaphore counter zero
    800201ae - semaphore counter overflow
    800201af - event flag condition not occur
    800201b0 - this event flag cannot accept waits with multiple threads
    800201b1 - illegal event flag wait pattern
    800201b2 - message box have no message
    800201b3 - message pipe is full
    800201b4 - message pipe is empty
    800201b5 - wait object deleted
    800201b6 - illegal memory block
    800201b7 - illegal memory size
    800201b8 - illegal scratchpad address
    800201b9 - scratch pad in use
    800201ba - scratchpad not in use
    800201bb - illegal type
    800201bc - illegal size
    800201bd - illegal count
    800201be - not found vtimer
    800201bf - illegal vtimer ID
    800201c0 - illegal KTLS ID
    800201c1 - KTLS is full
    800201c2 - KTLS is busy
    80020258 - invalid such priority
    80020259 - device name is invalid
    8002025a - device name is unknown
    8002025b - pm information is registered already
    8002025c - pm information is not registered
    8002025d - major state is invalid value
    8002025e - request is invalid
    8002025f - request is unknown
    80020260 - unit number is invalid
    80020261 - cannot cancel request
    80020262 - pm information is invalid
    80020263 - argument is invalid
    80020264 - already target epower state
    80020265 - failed to change system power state
    80020266 - cannot change device power state
    80020267 - device does not support such power state
    800202bc - request to the DMAC failed
    800202bd - DMA operation is less or equal one
    800202be - the operation is already queued
    800202bf - the operation is already finished or not queueud
    800202c0 - the operation is already in transfer progress
    800202c1 - the operation is not assigned yet
    800202c2 - the sync operation timed out
    800202c3 - dma operation struct is already freed
    800202c4 - dma operation is used
    800202c5 - dma operation is empty
    800202c6 - DMA operation is aborted
    800202c7 - DMA operation is error
    800202c8 - physical DMA channel is already reserved
    800202c9 - physical DMA channel is not managed by dmac manager
    800202ca - there is a privilege address in link list
    800202cb - link list buffer is not enough
    800202cc - the operation is not assigned to physical DMA channel
    800202cd - the operation is child operation
    800202ce - it is too much than transferable datasize
    800202cf - argument is invalid
    80020320 - Too many open files
    80020321 - No such device
    80020322 - Cross-device link
    80020323 - Bad file descriptor
    80020324 - Invalid argument
    80020325 - Unsupported operation
    80020326 - Alias is already used
    80020327 - Cannot mount
    80020328 - Driver deleted
    80020329 - Async operation is busy
    8002032a - No async operation
    8002032b - Device is already registered
    8002032c - No current working directory
    8002032d - Filename too long
    800203e8 - DECI3 No such device or address
    800203e9 - DECI3 I/O error
    800203ea - DECI3 Not enough core
    800203eb - STDIO not opened
    8002044c - Parameter is not cache aligned
    8002044d - End of kernel error code Never use this name
     
    1 Person gefällt das.
  2. DeXtar

    DeXtar New Member

    Beiträge:
    14
    Zustimmungen:
    1
    Mann mann mann, gibt das viele Fehler, man wundert sich :)
    Hab persönlich dieses Problem beim ausführen von Windows Vista PSP 80020148 - unsupported PRX type
    Was bedeutet PRX type

    Thx, guter Thread
     
    Zuletzt bearbeitet: 4. April 2010
  3. Deki_79

    Deki_79 New Member

    Beiträge:
    18
    Zustimmungen:
    0
    ja ich habe das selbe problem, komme leider nicht weiter. :mad:
    Kann jemand helfen?

    Danke
     
  1. Um unsere Webseite für Sie optimal zu gestalten und fortlaufend verbessern zu können, verwenden wir Cookies. Weitere Informationen zu Cookies erhalten Sie in unserer Datenschutzerklärung.
    Information ausblenden